1.The capability of the cover is impacted by the items in the boat/features of the boat. A retracted bimini top, large seats, large console, captain's chair, or any other items that extend upwards past the top of the rails will impact the fit of the cover such that it may not fit this perfectly.
2.You may consider ordering a cover of one foot larger, due to the varieties of those types of boats. (check pictures below as your reference before place an order)
3.Measure your boat's centerline length in a flat, straight line from the bow tip to the farthest point aft. (Do not measure up and over windshields, etc.) Add length for options you want to cover, such as bow pulpits, trolling motors and swim platforms.
4.Measure beam width (widest area of boat) in a straight, flat line from side to side. (Note: the windshield area is the widest point on some boats, while the transom is the widest on other boats.) Beam width and centerline length are all you'll need to purchase most universal fit covers.
5.Long exposure to the sun may cause color transfer of the boat cover. We suggest that the boat cover should not touch light colored fabric or leather directly in case of color transfer. If necessary, please use a plastic film to separate the boat cover from the fabric or leather.
6.This boat cover is NOT suitable for the boats with protruding canopy in the middle.
PU coating technology for maximum water resistance
Resistant to mildew and UV damage
Quick release buckles and strap system
Elastic hem and double stitched seams
1 roll of tie-down strap