Automatic bilge pumps with Built-in switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris. Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, are cost effective, have low amp draw and are easy to install. Bilge pumps are designed to exhaust standing water only. They are not intended to prevent rapid accumulation of on-board water due to rough weather, hull damage, and/or other unsafe navigational conditions. Model volt Flow Current Head wire head Outlet Dia MKNBP1-G600-06 12 600GPH 2.5A 2.5m 1m 19 mm/3/4" MKNBP2-G600-06 24 600GPH 1.5A 2.5m 1m 19 mm/3/4" MKNBP1-G750-06 12 750GPH 3.0A 3m 1m 19 mm/3/4" MKNBP2-G750-06 24 750GPH 1.6A 3m 1m 19 mm/3/4" MKNBP1-G1100-06 12 1100GPH 3.8A 5m 1m 29mm/1-1/8" MKNBP2-G1100-06 24 1100GPH 2.0A 5m 1m 29mm/1-1/8"
Connections: For 19mm (3/4") bore hose for 600GPH &750GPH, 29mm hore hose for 1100GPH. Output: Up to 1100 gallons/hour. Max. recommended discharge head 2.5m.
All-in-one pump & switch - No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
Totally submersible and ignition protected.Compact pump for smaller vessels. Tough plastic body.Limited one year warranty.
Can be used with switch panel for manual override.Includes comprehensive user manual with installation instructions and wiring diagram.