Non-automatic bilge pumps offer traditional operation activated by a float or panel switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris. Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, and cost effective, have low amp draw and are easy to install. They are designed to fit in the lowest part of the bilge and only require discharge pipe work and electricity supply. Also can be used in other applications like transfer river water, work together with solar panel or battery. Applications • Typically used in boat hulls / bilges • Bait tanks • Ponds, pools, spas • Other applications where you have to remove water from • To be used to pump clean water only • NOT designed for continuous use. Intermittent use only, duty cycle: 30 minute intervals We also stock automatic float switches, which turn the pump on and off at preset water levels
12VDC motors standard , flow:1100GPH, Amp Max: 3.2A , outlet orifice: ? 19 mm -3/4" , Dimension : 114x95 (4.5x3.75) Watt-120W,Max Lift 230ft, max Submersion-100ft, Leads-3Ft. 16AWG, Pump Scope--1000GPH, Outlet Port : 2" (12.7 mm I.D.) Barbed Fitting for 1/2" I.D. (12.7 mm I.D.)Tubing. - Port: 3/4" Barb
Typical Uses: Suitable for hydraulic systems fed with cold water-used in line to be fed by gravity or pressure, Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc
Pumps reliable high quality. Built for the harsh marine environment, are suitable to withstand the most adverse condition. The water-cooled engine ensures a long service life
Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
Attention : Can not be used to pump oil - otherwise the pump will not work.